Spin and extract honey from your frames using the Honey Spinner two-frame (2-frame) tangential honey extractor. See our FAQ. Buy DIY Plans. Buy Used Honey Extractors. Plastic or Stainless?

The Honey Spinner ORIGINAL is a top-loaded two frame (2 frame) tangential (as opposed to radial) centrifugal force honey extractor with bottom reservoir. Both the Honey Spinner ORIGINAL and MINI honey extractors are compact, lightweight (less than 10 lbs) and cost-conscious. If you only have a few beehives, these extractors are just right. Since these honey extractors are predominantly plastic and wood and conveniently compact and stowable, you save on shipping costs and storage requirements (stainless steel extractors are heavy, large and sometimes require dedicated space).

To use the Honey Spinner, simply unpack the box, quickly assemble the kit, and start spinning the honey out of your honeycomb frames. All you need are your honey frames (super sizes 5 3/8" or 6 1/4" for the ORIGINAL and the MINI can use all frame sizes-- even hive body sizes) and a variable speed drill to turn the axle. The Honey Spinner is fast and complete unlike gravity extraction methods that are slow and can leave considerable useable honey in the comb. A mesh honey filter strainer sieve is included free with each item order. A drill adapter is also provided. And cleanup is easy with soap and water under a showerhead. Then, stow the extractor in its box for next season.


Honey Spinner Extractor Logo Med

The Honey Spinner MINI
Lowest-cost two-frame honey extractor!
Honey Spinner Honey Extractor Mandrel
(pictured frames not included)

HS MINI Shopping Cart
Made in the USA!
...Make it yourself; buy plans.
NOTICE: PROVISIONAL PATENT APPLICATION INITIATED

Functionality: Simple operation! Lightweight! Easy cleanup!
  • To get started, unpack your Honey Spinner MINI honey extractor.
  • Assemble the MINI following the included instructions (no tools required).
  • Insert the Honey Spinner MINI into a container of your choice.
  • Load your uncapped (may be done with a fork) honey frames into the mandrel.
  • Insert the provided drill adapter into a variable speed drill.
  • Rotate the Honey Spinner MINI with the variable speed drill.
  • Use the filter strainer to filter the honey.
  • Bottle the filtered honey, and clean the Honey Spinner for next season.

    What you need to Provide:
  • Uncapped honey comb in frames (note: all standard honey super and hive body frames may be used)
  • Variable speed drill
  • Food safe container
  • NOTE: All foundations (wire reinforced, plastic and unreinforced [see FAQ]) are useable since rotational speed is controlled by the operator.
  • Honey Spinner Fits Hive Body Frames
    (pictured with large hive body frames)

    What's Included?
  • Extractor Axle with 2-frame Mandrel
  • FREE Polyester Honey Filter Strainer
  • Drill Adapter
  • Assembly & Operating Instructions
  • NOTE: Upper crosspiece and lower stabilizer in Honey Spinner ORIGINAL are not supplied with the MINI; they are provided in the MINI UPGRADE.

    Product Details:
  • Packaged Size: 4" x 4" x 16"
  • Assembled Size: 3.5" x 7.5" x 32"
  • Weight: Approximately 3 lbs
  • Simple assembly; no tools required
  • Mandrel plastic is safe NSF graded material
  • See our FAQ

  • The Honey Spinner ORIGINAL
    Best two-frame honey extractor in the world!
    Honey Spinner Honey Extractor Assembled
    (pictured frames, bottled honey, girl and drill not included)

    HS Shopping Cart
    Made in the USA!
    ...Make it yourself; buy plans.
    Unpack Honey Spinner Drill Honey Extractor
    NOTICE: PROVISIONAL PATENT APPLICATION INITIATED

    Functionality: Simple operation! Lightweight! Easy cleanup!
  • To get started, unpack your Honey Spinner honey extractor.
  • Assemble the mandrel and honey gate following the included instructions (no tools required).
  • Place the filter strainer over the top of the reservoir.
  • Place the extractor bodies on reservoir and secure with provided straps.
  • Insert the frame axle and mandrel into the top of the extractor.
  • Load your uncapped (may be done with a fork) honey frames into the mandrel.
  • Insert the provided drill adapter into a variable speed drill.
  • Rotate the Honey Spinner axle with the variable speed drill.
  • Bottle your filtered honey or store it in the reservoir, and clean the Honey Spinner for next season.

    What you need to Provide:
  • Uncapped honey comb in frames (note: only standard honey super frames may be used-- sizes 5 3/8" or 6 1/4")
  • Variable speed drill
  • Honey Extractor

    What's Included?
  • 5 Gallon Bottom Reservoir
  • Extractor Body (Lower and Upper)
  • Extractor Axle with 2-frame Mandrel
  • FREE Polyester Honey Filter Strainer
  • Two Elastic Straps
  • Drill Adapter
  • Assembly & Operating Instructions
  • Honey Gate Spigot, Gasket and Threaded Bushing

    Product Details:
  • Packaged Size: 12" x 12" x 20"
  • Assembled Size: 12" x 12" x 47"
  • Weight: Approximately 10 lbs
  • Simple assembly; no tools required
  • Buckets are made of FDA-approved, BPA-free resin
  • See our FAQ

  • The Honey Spinner MINI UPGRADE
    Upgrades the MINI to a complete Honey Spinner ORIGINAL!

    HS MINI UPGRADE Shopping Cart
    Made in the USA!
    ...Make it yourself; buy plans.
    NOTICE: PROVISIONAL PATENT APPLICATION INITIATED

    Functionality: Simple conversion of MINI to ORIGINAL!
  • To get started, unpack your Honey Spinner MINI UPGRADE kit.
  • Place the filter strainer over the top of the reservoir.
  • Place the extractor bodies on reservoir and secure with provided straps.
  • Insert the MINI into the top of the extractor using the provided crosspiece.
  • Load your uncapped (may be done with a fork) honey frames into the mandrel.
  • Rotate the Honey Spinner axle with the variable speed drill.
  • Bottle your filtered honey or store it in the reservoir, and clean the Honey Spinner for next season.

    What you need to Provide:
  • Uncapped honey comb in frames (note: only standard honey super frames may be used-- sizes 5 3/8" or 6 1/4")
  • Variable speed drill
  • Previously purchased Honey Spinner MINI
  • What's Included?
  • 5 Gallon Bottom Reservoir
  • Extractor Body (Lower and Upper)
  • Axle Assembly Crosspiece
  • FREE Polyester Honey Filter Strainer
  • Two Elastic Straps
  • Assembly & Operating Instructions

    Product Details:
  • Packaged Size: 12" x 12" x 18"
  • Assembled Size: 12" x 12" x 46"
  • Weight: Approximately 7 lbs
  • Simple assembly; no tools required
  • Buckets are made of FDA-approved, BPA-free resin
  • See our FAQ

  • Honey Gate
    Honey Extractor Gate
    Click here to buy.

    NOTE: The ORIGINAL already includes one of these honey gates.

    You will receive (1) Multi-use Spigot, (1) Gasket, and (1) Threaded Bushing when you purchase this listing. Pictured bucket is not included. Details: Food safe materials. 3/4" threaded spigot can be used in popular water container closures. To use the spigot, gasket and threaded bushing as a honey gate in a thin-wall container, drill and deburr a 1" hole; then, install and tighten the assembly with the gasket on the outside of the wall next to the spigot flange. This assembly works on the Honey Spinner ORIGINAL honey extractor as seen in the pictures. Gasket may be black or white. Threaded bushing appearance may vary from that pictured but will function the same.


    4 (+1) Honey Filter Strainers
    USD $25.00 includes S/H within CONUS. This price also includes (4) strainers; an extra (1) strainer, without guarantee, is also included free of charge. Thus, you will receive (5) polyester strainers; the free extra (1) strainer is to cover you and us in the odd case that there is a blemish or sewing error in one of the (4) strainers you purchase.

    Ordering: Credit Card orders are only accepted online. Online orders utilize our secure shopping cart. Visa, MC, Discover, and American Express are accepted.

    Money orders, cashiers checks, and personal checks are also accepted through the mail; make these paper orders payable to Martin Subsidiaries. Allow fourteen days for personal checks to clear. Please do not send cash. Please use our printable mail order form. The mailing address is below.


    Contact: Reach us by email, voicemail, or post. Phones are rarely manned. Email will elicit the quickest response.

    Checks and Money Orders Payable to: Martin Subsidiaries
    Email: s@honeyspinner.com | Voicemail: 1-540-551-4867
    Address: honeyspinner.com, 20 West 1st South, #210, Rexburg, ID, 83440

    Shipping & Tracking: Orders are ordinarily shipped within three business days. Orders received after 1500 EST are treated as if they were received the next business day. Both USA and international orders (see below) are welcome. If more than one item is ordered, all items will be shipped in the same box if possible.

    USA orders are shipped by UPS and USPS. Tracking numbers can be provided for UPS shipments by email after the order has been shipped. When you receive your UPS tracking number, please visit the UPS tracking site to see the status of your shipment. USA orders are always shipped by USPS if a US Post Office box is the shipping address. Additional S/H may be charged for Alaska and Hawaii orders.

    International orders are also accepted. International orders are sent by either USPS or UPS. Please send an email for a shipping quote. The dimensions and weight are listed above; you can visit ups.com or usps.com to see if shipping to your country is worth the cost.


    Guarantee & Returns: With your purchase, you receive a 15-day money-back guarantee. Defective products will be replaced or refunded according to your choice. Other products must be returned in "as-new" condition and a 30%-of-product-cost repackaging and restocking fee will be deducted from the refund. Shipping fees are not refunded. If a returned product is not defective and has clear "wear and tear," the refund will reflect deductions accordingly.

    To process a return, please repackage the item in its original shipping container along with all parts. Include a note explaining the reason for the return. If the item is defective, note why it is defective, and specify whether you would like a refund or exchange.


    Replacement Parts: All parts are available for sale. If you damage your item or lose a part, please send an email for a quote.

    Design Notes: Actual appearance of all items may vary from those pictured. Design is subject to change without notice. Strainer design may vary. Part colors may vary. Wood type may vary. Wood may contain knots that don't affect fit or function. Tube will likely have manufacturer markings. Design of mandrel head that receives drill adapter may vary but not in function.

    Honey Spinner Extractor Logo Small© | s@honeyspinner.com | 20 West 1st South, #210, Rexburg, ID, 83440